<Spase xmlns="http://www.spase-group.org/data/schema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="https://www.spase-group.org/data/schema https://www.spase-group.org/data/schema/spase-2.7.1.xsd">
  <Version>2.7.1</Version>
  <MetadataRightsList>
    <Rights>
      <SchemeURI>https://spdx.org/licenses/</SchemeURI>
      <RightsIdentifierScheme>SPDX</RightsIdentifierScheme>
      <RightsIdentifier>CC0-1.0</RightsIdentifier>
      <RightsURI>https://spdx.org/licenses/CC0-1.0.html</RightsURI>
      <RightsName>Creative Commons Zero v1.0 Universal</RightsName>
      <Note>CC0 1.0 Universal is the Creative Commons license applicable to all publicly available SPASE metadata descriptions</Note>
    </Rights>
  </MetadataRightsList>
  <NumericalData>
    <ResourceID>spase://NASA/NumericalData/ParkerSolarProbe/FIELDS/AEB/Level2/PT1H</ResourceID>
    <NamingAuthority>NASA</NamingAuthority>
    <ResourceType>NumericalData</ResourceType>
    <ResourceHeader>
      <ResourceName>PSP FIELDS Antenna Electronics Board (AEB) Housing Keeping Data</ResourceName>
      <DOI>https://doi.org/10.48322/ydvh-f703</DOI>
      <ReleaseDate>2025-12-04T13:30:16Z</ReleaseDate>
      <RevisionHistory>
        <RevisionEvent>
          <ReleaseDate>2023-08-31T12:34:56.789Z</ReleaseDate>
          <Note>Only known prior ReleaseDate of the metadata</Note>
        </RevisionEvent>
        <RevisionEvent>
          <ReleaseDate>2025-06-11T19:07:13.663Z</ReleaseDate>
          <Note>Initial SPASE XML resource description submission, metadata generated by SAB</Note>
        </RevisionEvent>
        <RevisionEvent>
          <ReleaseDate>2025-11-04T23:00:18Z</ReleaseDate>
          <Note>Changed http to https in top-level schemaLocation attribute. Fixed version number separator in top-level schemaLocation attribute. Matched version number in schemaLocation attribute to updated value in Version tag. Added ResourceType and NamingAuthority. Added DOI. TLK</Note>
        </RevisionEvent>
        <RevisionEvent>
          <ReleaseDate>2025-12-04T13:30:16Z</ReleaseDate>
          <Note>Added MetadataRightsList and RightsList(s). Updated to 2.7.1. ZCB</Note>
        </RevisionEvent>
      </RevisionHistory>
      <Description>PSP FIELDS Antenna Electronics Board (AEB) Housing Keeping Data.</Description>
      <Acknowledgement>Please acknowledge the Principal Investigator Stuart D Bale for use of the Data</Acknowledgement>
      <PublicationInfo>
        <Authors>Bale, Stuart D;  Bonnell, John;  Pulupa, Marc;  Quinn, Timothy;  Schroeder, Peter</Authors>
        <PublicationDate>2020-01-01T00:00:00</PublicationDate>
        <PublishedBy>NASA Space Physics Data Facility</PublishedBy>
      </PublicationInfo>
      <Contact>
        <PersonID>spase://SMWG/Person/Stuart.D.Bale</PersonID>
        <Role>PrincipalInvestigator</Role>
      </Contact>
      <Contact>
        <PersonID>spase://SMWG/Person/Robert.M.Candey</PersonID>
        <Role>MetadataContact</Role>
      </Contact>
      <Contact>
        <PersonID>spase://SMWG/Person/Scott.Boardsen</PersonID>
        <Role>MetadataContact</Role>
      </Contact>
      <InformationURL>
        <Name>PSP FIELDS Instrument Suite, Space Science Review Publication</Name>
        <URL>https://doi.org/10.1007/s11214-016-0244-5</URL>
        <Description>Parker Solar Probe, PSP, FIELDS Instrument Suite Description: Bale, S.D., Goetz, K., Harvey, P.R. et al., The FIELDS Instrument Suite for Solar Probe Plus, Space Sci Rev 204, 49-82 (2016)</Description>
      </InformationURL>
      <InformationURL>
        <Name>PSP FIELDS Instrument Suite, Digital Fields Board, JGR Space Physics Publication</Name>
        <URL>https://doi.org/10.1002/2016JA022344</URL>
        <Description>Parker Solar Probe, PSP, FIELDS Instrument Suite, Digital Fields Board, DFB, Description: Malaspina, D.M., Ergun, R.E., Bolton, M. et al., The Digital Fields Board for the FIELDS Instrument Suite on the Solar Probe Plus Mission: Analog and Digital signal Processing, JGR Space Physics, 121, 5088-5096 (2016)</Description>
      </InformationURL>
      <InformationURL>
        <Name>PSP FIELDS Instrument Suite, Data Description, SOC Web Site, UC Berkeley</Name>
        <URL>https://fields.ssl.berkeley.edu/data/</URL>
        <Description>Parker Solar Probe, PSP, FIELDS Instrument Suite, Data Description and Access, Spacecraft Operations Center, SOC, Web Site, UC Berkeley</Description>
      </InformationURL>
      <InformationURL>
        <Name>PSP FIELDS Instrument Suite, Rules of the Road, SOC Web Site, UC Berkeley</Name>
        <URL>https://fields.ssl.berkeley.edu/rules/</URL>
        <Description>Parker Solar Probe, PSP, FIELDS Instrument Suite, Rules of the Road, Spacecraft Operations Center, SOC, Web Site, UC Berkeley</Description>
      </InformationURL>
    </ResourceHeader>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <RightsList>
        <Rights>
          <SchemeURI>https://spdx.org/licenses/</SchemeURI>
          <RightsIdentifierScheme>SPDX</RightsIdentifierScheme>
          <RightsIdentifier>CC0-1.0</RightsIdentifier>
          <RightsURI>https://spdx.org/licenses/CC0-1.0.html</RightsURI>
          <RightsName>Creative Commons Zero v1.0 Universal</RightsName>
          <Note>CC0 1.0 Universal is the Creative Commons license applicable to all publicly available NASA Heliophysics data products</Note>
        </Rights>
      </RightsList>
      <AccessURL>
        <Name>FTPS from SPDF (not with most browsers)</Name>
        <URL>ftps://spdf.gsfc.nasa.gov/pub/data/psp/fields/l2/aeb</URL>
        <Description>Access to Data in CDF Format via ftps from SPDF</Description>
      </AccessURL>
      <AccessURL>
        <Name>HTTPS from SPDF</Name>
        <URL>https://spdf.gsfc.nasa.gov/pub/data/psp/fields/l2/aeb</URL>
        <Description>Access to Data in CDF Format via https from SPDF</Description>
      </AccessURL>
      <AccessURL>
        <Name>CDAWeb</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/cgi-bin/eval2.cgi?dataset=PSP_FLD_L2_AEB&amp;index=sp_phys</URL>
        <ProductKey>PSP_FLD_L2_AEB</ProductKey>
        <Description>Access to ASCII, CDF, and Plots via NASA/GSFC CDAWeb</Description>
      </AccessURL>
      <Format>CDF</Format>
      <Encoding>None</Encoding>
            <AccessDirectoryTemplate>https://cdaweb.gsfc.nasa.gov/pub/data/psp/fields/l2/aeb/$Y</AccessDirectoryTemplate>
            <AccessFilenameTemplate>psp_fld_l2_aeb_$Y$m$d_$v.cdf</AccessFilenameTemplate>
      <Acknowledgement>Please acknowledge the Principal Investigator Stuart D Bale . Please acknowledge the Data Providers and CDAWeb when using these Data.</Acknowledgement>
    </AccessInformation>
        <AccessInformation>
            <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
            <Availability>Online</Availability>
            <AccessRights>Open</AccessRights>
            <AccessURL>
                <Name>CDAWeb Programmatic Data Access</Name>
                <URL>https://cdaweb.gsfc.nasa.gov/WS/cdasr/1/dataviews/sp_phys/datasets/PSP_FLD_L2_AEB/clientLibraryExample/</URL>
                <Style>WebService</Style>
                <ProductKey>PSP_FLD_L2_AEB</ProductKey>
                <Description>Access to this data from common programming environments.  Note: this AccessInformation element was added by HDPWS.</Description>
            </AccessURL>
            <Format>Binary</Format>
            <Acknowledgement>Please acknowledge the Principal Investigator Stuart D Bale . Please acknowledge the Data Providers and CDAWeb when using these Data.</Acknowledgement>
        </AccessInformation>
    <AccessInformation>
      <RepositoryID>spase://SMWG/Repository/NASA/GSFC/SPDF</RepositoryID>
      <Availability>Online</Availability>
      <AccessRights>Open</AccessRights>
      <RightsList>
        <Rights>
          <SchemeURI>https://spdx.org/licenses/</SchemeURI>
          <RightsIdentifierScheme>SPDX</RightsIdentifierScheme>
          <RightsIdentifier>CC0-1.0</RightsIdentifier>
          <RightsURI>https://spdx.org/licenses/CC0-1.0.html</RightsURI>
          <RightsName>Creative Commons Zero v1.0 Universal</RightsName>
          <Note>CC0 1.0 Universal is the Creative Commons license applicable to all publicly available NASA Heliophysics data products</Note>
        </Rights>
      </RightsList>
      <AccessURL>
        <Name>CDAWeb HAPI Server</Name>
        <URL>https://cdaweb.gsfc.nasa.gov/hapi</URL>
        <Style>HAPI</Style>
        <ProductKey>PSP_FLD_L2_AEB</ProductKey>
        <Description>Web Service to this product using the HAPI interface.</Description>
      </AccessURL>
      <Format>CSV</Format>
      <Acknowledgement>Please acknowledge the Principal Investigator Stuart D Bale. Please acknowledge the Data Providers and CDAWeb when using these Data.</Acknowledgement>
    </AccessInformation>
    <ProcessingLevel>Calibrated</ProcessingLevel>
    <InstrumentID>spase://SMWG/Instrument/</InstrumentID>
    <MeasurementType>InstrumentStatus</MeasurementType>
    <TemporalDescription>
      <TimeSpan>
        <StartDate>2018-10-02T03:46:32.000</StartDate>
        <StopDate>2024-10-31T23:13:39.000</StopDate>
      </TimeSpan>
      <Cadence>PT99999.999S</Cadence>
    </TemporalDescription>
    <ObservedRegion>Heliosphere</ObservedRegion>
    <ObservedRegion>Heliosphere.Inner</ObservedRegion>
    <ObservedRegion>Heliosphere.NearEarth</ObservedRegion>
    <ObservedRegion>Sun.Corona</ObservedRegion>
    <Parameter>
      <Name>epoch_aeb1</Name>
      <ParameterKey>epoch_aeb1</ParameterKey>
      <Description>Time in TT2000 for AEB1 data</Description>
      <Caveats>This Parameter exhibits an increasing Monotonic Progression</Caveats>
      <Units>ns</Units>
      <UnitsConversion>1.0e-9&gt;s</UnitsConversion>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>epoch_aeb1</AxisLabel>
        <ValueFormat>I22</ValueFormat>
        <ScaleMin>6.3745034619904e+13</ScaleMin>
        <ScaleMax>6.3745121019904e+13</ScaleMax>
      </RenderingHints>
      <ValidMin>2009-12-31T23:59:59.999998080</ValidMin>
      <ValidMax>2049-12-31T23:58:59.999998208</ValidMax>
      <FillValue>9999-12-31T23:59:59.999999999</FillValue>
      <Support>
        <SupportQuantity>Temporal</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>epoch_aeb2</Name>
      <ParameterKey>epoch_aeb2</ParameterKey>
      <Description>Time in TT2000 for AEB2 data</Description>
      <Caveats>This Parameter exhibits an increasing Monotonic Progression</Caveats>
      <Units>ns</Units>
      <UnitsConversion>1.0e-9&gt;s</UnitsConversion>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>epoch_aeb2</AxisLabel>
        <ValueFormat>I22</ValueFormat>
        <ScaleMin>6.3745034619904e+13</ScaleMin>
        <ScaleMax>6.3745121019904e+13</ScaleMax>
      </RenderingHints>
      <ValidMin>2009-12-31T23:59:59.999998080</ValidMin>
      <ValidMax>2049-12-31T23:58:59.999998208</ValidMax>
      <FillValue>9999-12-31T23:59:59.999999999</FillValue>
      <Support>
        <SupportQuantity>Temporal</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_TELEM_FLAG</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_TELEM_FLAG</ParameterKey>
      <Description>Flag indicating source of AEB1 data.</Description>
      <Caveats>This flag indicates whether data is derived directly from AEB telemetry. During normal operations, AEB housekeeping data are returned in telemetry packets. Packets are generated for each update to AEB settings, and periodically for monitoring purposes. Data corresponding to these packets have a flag value of 1. During bias sweeps, settings are updated too rapidly for each change to be telemetered in an individual packet, so the bias settings during the sweep areinferred based on FIELDS instrument command history. Data corresponding to these inferred measurements have a flag value of 0. Data with a flag value of 0 contains only commanded voltages and currents (no measured voltages, currents, or temperatures).</Caveats>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>aeb1 TELEM FLAG</AxisLabel>
        <ValueFormat>I6</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>1</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>1</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Other</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_TELEM_FLAG</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_TELEM_FLAG</ParameterKey>
      <Description>Flag indicating source of AEB2 data.</Description>
      <Caveats>This flag indicates whether data is derived directly from AEB telemetry. During normal operations, AEB housekeeping data are returned in telemetry packets. Packets are generated for each update to AEB settings, and periodically for monitoring purposes. Data corresponding to these packets have a flag value of 1. During bias sweeps, settings are updated too rapidly for each change to be telemetered in an individual packet, so the bias settings during the sweep areinferred based on FIELDS instrument command history. Data corresponding to these inferred measurements have a flag value of 0. Data with a flag value of 0 contains only commanded voltages and currents (no measured voltages, currents, or temperatures).</Caveats>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>aeb2 TELEM FLAG</AxisLabel>
        <ValueFormat>I6</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>1</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>1</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_AEB1_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_AEB1_TEMP</ParameterKey>
      <Description>Measured temperature of the AEB1 circuit board.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>AEB1_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-60.0</ScaleMin>
        <ScaleMax>80.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_PA1_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_PA1_TEMP</ParameterKey>
      <Description>Measured temperature of the V1 preamplifier.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>PA1_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-120.0</ScaleMin>
        <ScaleMax>100.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_PA2_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_PA2_TEMP</ParameterKey>
      <Description>Measured temperature of the V2 preamplifier.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>PA2_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-120.0</ScaleMin>
        <ScaleMax>100.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_PA5_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_PA5_TEMP</ParameterKey>
      <Description>Measured temperature of the V5 preamplifier.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>PA5_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-120.0</ScaleMin>
        <ScaleMax>100.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_RBIAS</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_RBIAS</ParameterKey>
      <Description>Index of selected bias resistor for V1 bias current.</Description>
      <Caveats>RBIAS 0 = 49.9 MOhm, RBIAS 1 = 99 kOhm, RBIAS 2 = 2.89 MOhm.</Caveats>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_RBIAS</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>2</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>2</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_SHIELD_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_SHIELD_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V1 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_SHIELD_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_SHIELD_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_SHIELD_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V1 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_SHIELD_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_SHIELD_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_SHIELD_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V1 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_SHIELD_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_STUB_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_STUB_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V1 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_STUB_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_STUB_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_STUB_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V1 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_STUB_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_STUB_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_STUB_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V1 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_STUB_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_WHIP_CURR</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_WHIP_CURR</ParameterKey>
      <Description>Bias current applied to the V1 whip, derived from measured bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_WHIP_CURR</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_WHIP_CURR_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_WHIP_CURR_DAC</ParameterKey>
      <Description>Bias current applied to the V1 whip, derived from commanded bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_WHIP_CURR_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_WHIP_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_WHIP_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V1 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_WHIP_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_WHIP_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_WHIP_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V1 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_WHIP_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V1_WHIP_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V1_WHIP_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V1 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V1_WHIP_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_RBIAS</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_RBIAS</ParameterKey>
      <Description>Index of selected bias resistor for V2 bias current.</Description>
      <Caveats>RBIAS 0 = 49.9 MOhm, RBIAS 1 = 99 kOhm, RBIAS 2 = 2.89 MOhm.</Caveats>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_RBIAS</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>2</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>2</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_SHIELD_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_SHIELD_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V2 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_SHIELD_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_SHIELD_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_SHIELD_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V2 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_SHIELD_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_SHIELD_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_SHIELD_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V2 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_SHIELD_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_STUB_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_STUB_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V2 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_STUB_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_STUB_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_STUB_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V2 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_STUB_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_STUB_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_STUB_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V2 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_STUB_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_WHIP_CURR</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_WHIP_CURR</ParameterKey>
      <Description>Bias current applied to the V2 whip, derived from measured bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_WHIP_CURR</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_WHIP_CURR_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_WHIP_CURR_DAC</ParameterKey>
      <Description>Bias current applied to the V2 whip, derived from commanded bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_WHIP_CURR_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_WHIP_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_WHIP_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V2 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_WHIP_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_WHIP_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_WHIP_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V2 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_WHIP_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V2_WHIP_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V2_WHIP_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V2 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V2_WHIP_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V5_BOX_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V5_BOX_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V5 box.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V5_BOX_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V5_BOX_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V5_BOX_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V5 box.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V5_BOX_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V5_BOX_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V5_BOX_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V5 box.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V5_BOX_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V5_SENSOR_CURR</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V5_SENSOR_CURR</ParameterKey>
      <Description>Bias current applied to the V5 sensor, derived from measured bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V5_SENSOR_CURR</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V5_SENSOR_CURR_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V5_SENSOR_CURR_DAC</ParameterKey>
      <Description>Bias current applied to the V5 sensor, derived from commanded bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V5_SENSOR_CURR_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V5_SENSOR_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V5_SENSOR_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V5 sensor.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V5_SENSOR_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V5_SENSOR_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V5_SENSOR_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V5 sensor.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V5_SENSOR_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_V5_SENSOR_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_V5_SENSOR_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V5 sensor.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V5_SENSOR_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_XFL_CURR</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_XFL_CURR</ParameterKey>
      <Description>Current draw of the floating power supply for the V1 and V2 antennas.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>XFL_CURR</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>0.0</ScaleMin>
        <ScaleMax>300.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0.0</ValidMin>
      <ValidMax>300.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_XFL_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_XFL_TEMP</ParameterKey>
      <Description>Measured temperature of the floating power supply for the V1 and V2 antennas.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>XFL_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-60.0</ScaleMin>
        <ScaleMax>80.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_ZFL_CURR</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_ZFL_CURR</ParameterKey>
      <Description>Current draw of the floating power supply for the V5 sensor.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>ZFL_CURR</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>0.0</ScaleMin>
        <ScaleMax>300.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0.0</ValidMin>
      <ValidMax>300.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb1_ZFL_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb1</Set>
      <ParameterKey>psp_fld_l2_aeb1_ZFL_TEMP</ParameterKey>
      <Description>Measured temperature of the floating power supply for the V5 sensor.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>ZFL_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-60.0</ScaleMin>
        <ScaleMax>80.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_AEB2_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_AEB2_TEMP</ParameterKey>
      <Description>Measured temperature of the AEB2 circuit board.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>AEB2_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-60.0</ScaleMin>
        <ScaleMax>80.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_PA3_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_PA3_TEMP</ParameterKey>
      <Description>Measured temperature of the V3 preamplifier.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>PA3_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-120.0</ScaleMin>
        <ScaleMax>100.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_PA4_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_PA4_TEMP</ParameterKey>
      <Description>Measured temperature of the V4 preamplifier.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>PA4_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-120.0</ScaleMin>
        <ScaleMax>100.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_RBIAS</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_RBIAS</ParameterKey>
      <Description>Index of selected bias resistor for V3 bias current.</Description>
      <Caveats>RBIAS 0 = 49.9 MOhm, RBIAS 1 = 99 kOhm, RBIAS 2 = 2.89 MOhm.</Caveats>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_RBIAS</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>2</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>2</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_SHIELD_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_SHIELD_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V3 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_SHIELD_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_SHIELD_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_SHIELD_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V3 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_SHIELD_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_SHIELD_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_SHIELD_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V3 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_SHIELD_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_STUB_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_STUB_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V3 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_STUB_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_STUB_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_STUB_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V3 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_STUB_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_STUB_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_STUB_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V3 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_STUB_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_WHIP_CURR</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_WHIP_CURR</ParameterKey>
      <Description>Bias current applied to the V3 whip, derived from measured bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_WHIP_CURR</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_WHIP_CURR_DAC</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_WHIP_CURR_DAC</ParameterKey>
      <Description>Bias current applied to the V3 whip, derived from commanded bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_WHIP_CURR_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_WHIP_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_WHIP_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V3 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_WHIP_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_WHIP_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_WHIP_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V3 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_WHIP_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V3_WHIP_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V3_WHIP_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V3 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V3_WHIP_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_RBIAS</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_RBIAS</ParameterKey>
      <Description>Index of selected bias resistor for V4 bias current.</Description>
      <Caveats>RBIAS 0 = 49.9 MOhm, RBIAS 1 = 99 kOhm, RBIAS 2 = 2.89 MOhm.</Caveats>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_RBIAS</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>2</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>2</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_SHIELD_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_SHIELD_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V4 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_SHIELD_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_SHIELD_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_SHIELD_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V4 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_SHIELD_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_SHIELD_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_SHIELD_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V4 shield.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_SHIELD_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_STUB_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_STUB_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V4 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_STUB_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_STUB_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_STUB_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V4 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_STUB_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_STUB_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_STUB_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V4 stub.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_STUB_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_WHIP_CURR</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_WHIP_CURR</ParameterKey>
      <Description>Bias current applied to the V4 whip, derived from measured bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_WHIP_CURR</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_WHIP_CURR_DAC</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_WHIP_CURR_DAC</ParameterKey>
      <Description>Bias current applied to the V4 whip, derived from commanded bias voltage.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_WHIP_CURR_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-400.0</ScaleMin>
        <ScaleMax>400.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-500.0</ValidMin>
      <ValidMax>500.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_WHIP_VOLT</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_WHIP_VOLT</ParameterKey>
      <Description>Measured bias voltage applied to the V4 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_WHIP_VOLT</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_WHIP_VOLT_DAC</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_WHIP_VOLT_DAC</ParameterKey>
      <Description>Commanded bias voltage applied to the V4 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>V</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_WHIP_VOLT_DAC</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-40.0</ScaleMin>
        <ScaleMax>40.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-50.0</ValidMin>
      <ValidMax>50.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_V4_WHIP_VOLT_DAC_counts</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_V4_WHIP_VOLT_DAC_counts</ParameterKey>
      <Description>Commanded raw bias voltage (in DAC counts) applied to the V4 whip.</Description>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>V4_WHIP_VOLT_DAC_counts</AxisLabel>
        <ValueFormat>I8</ValueFormat>
        <ScaleMin>0</ScaleMin>
        <ScaleMax>4095</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>4095</ValidMax>
      <FillValue>-32768</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_XFL_CURR</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_XFL_CURR</ParameterKey>
      <Description>Current draw of the floating power supply for the V3 and V4 antennas.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>µA</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>XFL_CURR</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>0.0</ScaleMin>
        <ScaleMax>300.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>0.0</ValidMin>
      <ValidMax>300.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>psp_fld_l2_aeb2_XFL_TEMP</Name>
      <Set>Time series defined by using: epoch_aeb2</Set>
      <ParameterKey>psp_fld_l2_aeb2_XFL_TEMP</ParameterKey>
      <Description>Measured temperature of the floating power supply for the V3 and V4 antennas.</Description>
      <Cadence>PT99999.999S</Cadence>
      <Units>°C</Units>
      <RenderingHints>
        <DisplayType>TimeSeries</DisplayType>
        <AxisLabel>XFL_TEMP</AxisLabel>
        <ValueFormat>F12.2</ValueFormat>
        <ScaleMin>-60.0</ScaleMin>
        <ScaleMax>80.0</ScaleMax>
        <ScaleType>LinearScale</ScaleType>
      </RenderingHints>
      <ValidMin>-200.0</ValidMin>
      <ValidMax>200.0</ValidMax>
      <FillValue>-1.0e+31</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>epoch_quality_flags</Name>
      <ParameterKey>epoch_quality_flags</ParameterKey>
      <Description>Time for the FIELDS quality flag</Description>
      <Caveats>This Parameter exhibits an increasing Monotonic Progression</Caveats>
      <Units>ns</Units>
      <UnitsConversion>1.0e-9&gt;s</UnitsConversion>
      <RenderingHints>
        <AxisLabel>epoch</AxisLabel>
        <ValueFormat>I22</ValueFormat>
        <ScaleMin>6.3745034619904e+13</ScaleMin>
        <ScaleMax>6.3745121019904e+13</ScaleMax>
      </RenderingHints>
      <ValidMin>2010-01-01T00:00:00.000000000</ValidMin>
      <ValidMax>2050-01-01T00:00:00.000000000</ValidMax>
      <FillValue>9999-12-31T23:59:59.999999999</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
    <Parameter>
      <Name>quality_flags</Name>
      <Set>Time series defined by using: epoch_quality_flags</Set>
      <ParameterKey>psp_fld_l2_quality_flags</ParameterKey>
      <Description>FIELDS quality flag</Description>
      <Caveats>FIELDS quality flags. This is a bitwise variable, meaning that multiple flags can be set for a single time, by adding flag values. Current flagged values are: 1: FIELDS antenna bias sweep, 2: PSP thruster firing, 4: SCM Calibration, 8: PSP rotations for MAG calibration (MAG rolls), 16: FIELDS MAG calibration sequence, 32: SWEAP SPC in electron mode, 64: PSP Solar limb sensor (SLS) test. 128: PSP spacecraft is off umbra pointing. 256: High frequency noise affecting RFS and TDS receivers. 512: Antennas driven towards the FIELDS power supply rails. 1024: Anomalous bias current on one or more FIELDS antennas. A value of zero corresponds to no set flags. Not all flags are relevant to all FIELDS data products, refer to notes in the CDF metadata and on the FIELDS SOC website for information on how the various flags impact FIELDS data. For more information on the quality flags describing high frequency noise and antennas driven to the rails, see release notes for PSP/FIELDS releases 8 and 9. For more information on the quality flags describing anomalous bias current, see release notes for PSP/FIELDS release 12. Additional flagged items may be added in the future.</Caveats>
      <Cadence>PT99999.999S</Cadence>
      <RenderingHints>
        <AxisLabel>flag</AxisLabel>
        <ValueFormat>I10</ValueFormat>
      </RenderingHints>
      <ValidMin>0</ValidMin>
      <ValidMax>255</ValidMax>
      <FillValue>4294967295</FillValue>
      <Support>
        <SupportQuantity>Housekeeping</SupportQuantity>
      </Support>
    </Parameter>
  </NumericalData>
</Spase>