HDPWS

Rosetta - LAP - plasma density (NEL)

ResourceID
spase://CNES/NumericalData/CDPP-AMDA/Rosetta/LAP/ros-lap-nel

Description
This data set is based on LAP data with use of a long-term LAP-MIP cross calibration for some time intervals when MIP-LAP density is not available. Plasma density derived from individual current measurements or floating potential measurements on one probe. This is a preliminary data set which will be replaced by another in a few months.

View XML | Edit

Details

Version:2.4.1

NumericalData

ResourceID
spase://CNES/NumericalData/CDPP-AMDA/Rosetta/LAP/ros-lap-nel
ResourceHeader
ResourceName
Rosetta - LAP - plasma density (NEL)
AlternateName
Plasma density which contains the highest time resolution cross-calibrated density data, when RPC-MIP is not delivering cross-calibrated density products
ReleaseDate
2019-08-26 18:52:52Z
Description
This data set is based on LAP data with use of a long-term LAP-MIP cross calibration for some time intervals when MIP-LAP density is not available. Plasma density derived from individual current measurements or floating potential measurements on one probe. This is a preliminary data set which will be replaced by another in a few months.
Contacts
Role Person StartDate StopDate Note
1. PrincipalInvestigator spase://CNES/Person/CDPP-AMDA/Anders.Eriksson
2. DataProducer spase://CNES/Person/CDPP-AMDA/Erik.Johansson

InformationURL
InformationURL
InformationURL
Name
RPC-LAP to Planetary Science Archive Interface Control Document
URL
InformationURL
Name
RPC-LAP Report on cross-calibration of LAP data to measurements by other RPC instruments
URL
AccessInformation
RepositoryID
Availability
Online
AccessRights
Open
AccessURL
Name
CDPP/AMDA HAPI Server
URL
Style
HAPI
ProductKey
ros-lap-nel
Description
Web Service to this product using the HAPI interface.
Format
CSV
Acknowledgement
Thank you for acknowledging the use of AMDA in publications with wording like "Data analysis was performed with the AMDA science analysis system provided by the Centre de Données de la Physique des Plasmas (CDPP) supported by CNRS, CNES, Observatoire de Paris and Université Paul Sabatier, Toulouse". See the Rules of the road at https://amda.cdpp.eu/help/policy.html . Please acknowledge the Data Providers.
AccessInformation
RepositoryID
Availability
Online
AccessRights
Open
AccessURL
Name
CDPP/AMDA Web application
URL
Description
Access to Data via CDPP/AMDA Web application.
Format
CSV
Format
VOTable
Format
CDF
Format
PNG
Acknowledgement
Thank you for acknowledging the use of AMDA in publications with wording like "Data analysis was performed with the AMDA science analysis system provided by the Centre de Données de la Physique des Plasmas (CDPP) supported by CNRS, CNES, Observatoire de Paris and Université Paul Sabatier, Toulouse". See the Rules of the road at https://amda.cdpp.eu/help/policy.html . Please acknowledge the Data Providers.
ProviderName
PSA
ProviderResourceName
RO-C-RPCLAP-5-xxx-NEL-V1.0
InstrumentIDs
MeasurementType
ThermalPlasma
TemporalDescription
TimeSpan
StartDate
2014-11-06 13:04:34Z
StopDate
2016-09-30 10:36:40Z
CadenceMin
PT0.016S
CadenceMax
PT128S
Caveats
It is highly recommended to take into account quality value while working with plasma density. * Parameter n_e_good corresponds to n_e quality gt 0.2 * Parameter n_e - all n_e quality values * Note that you can colorize n_e parameter with the quality value (use ColoredParameter field of Plot Interface). * Please always download quality value along with the n_e parameter. Data Source : * 1 - Downsampled floating potential measurement for an illuminated LAP1 * 2 - Downsampled floating potential measurement for an illuminated LAP2 * 3 - Vz for LAP1 * 4 - Vz for LAP1, but using a linearly extrapolated sweep Quality Flag : A quality flag is a (base 10) integer that is constructed in the two steps below: * Add together the constants associated with the relevant quality-related effects listed below. Note that these constants are chosen such that every digit represents up to three true/false values for the presence/absence of three specific separate quality-related effects. * Should the three quality-related effects be irrelevant for the given data product, then that digit is replaced by the digit “9”. Quality flag event description : * +1 - Low quality sweep analysis model fit * +2 - One of two meanings: (1) Low sample size; an average is based on fewer data points than nominal (due to filtering or otherwise) and applies to sweep steps and downsampled time series. (2) zero-padding; zeros replace lost samples for the purpose of calculating PSD. * +10 - One of two meanings: (1) Sweep data product and data products based on sweeps: SAA rotation of more than 0.05° during sweep. (2) Downsampled time series data product: Bias change within the 32 s downsampling period. * +20 - Probe in partial or full shadow * +100 - Rosetta wheel off-loading (WOL) or Orbit-control-maneuver (OCM) * +200 - One of two meanings: (1) For LAP1: LDL disturbance (LAP2 in LDL mode); (2) For LAP2: Contamination signature possibly present * +400 - Saturation Example: suppose that one encounters the quality flag “109”. 109 = 100 + 9 means (1) that there is an ongoing wheel off-loading (+100), and (2) that the quality-related effects associated with +1 and +2 cannot occur even in principle for the kind of data that one is looking at.
Parameter #1
Name
n_e_good (qual_nel> 0.2)
ParameterKey
ros_lap_nel_good
Description
Plasma density which contains the highest time resolution cross-calibrated density data, when RPC-MIP is not delivering cross-calibrated density products. Quality value > 0.2
Units
cm^-3
RenderingHints
DisplayType
TimeSeries
FillValue
0.0
Support
SupportQuantity
Other
Parameter #2
Name
n_e (nel)
ParameterKey
ros_lap_nel
Description
Plasma density which contains the highest time resolution cross-calibrated density data, when RPC-MIP is not delivering cross-calibrated density products
Units
cm^-3
RenderingHints
DisplayType
TimeSeries
FillValue
-1.e+09
Particle
ParticleQuantity
NumberDensity
Parameter #3
Name
n_e : qual
ParameterKey
ros_lap_nel_q
Description
Quality value in the range 0 (worst) to 1 (best). Corresponds to goodness of fit or how well the model fits the data.
RenderingHints
DisplayType
TimeSeries
Support
SupportQuantity
Other
Parameter #4
Name
data source
ParameterKey
ros_lap_nel_s
RenderingHints
DisplayType
TimeSeries
Support
SupportQuantity
Other
Parameter #5
Name
quality flag
ParameterKey
ros_lap_nel_f
Description
Quality flag constructed as the sum of multiple terms, depending on what quality related effects are present. Each digit is either in the range 0 (best) to 7 (worst), or 9 (not used)
RenderingHints
DisplayType
TimeSeries
Support
SupportQuantity
Other